Trim Rounded Satin Nickel Intermediate Toggle Switch and Toggle Switch Combination


Trim Rounded Satin Nickel Trim Rounded Intermediate Toggle Switch and Toggle Switch Combination

Click on finish to see the full range

Polished Chrome
Polished Chrome
Satin Chrome
Satin Chrome
Polished Brass
Polished Brass
 
Antique Brass
Antique Brass
Satin Nickel
Satin Nickel


Prices

 *Free delivery on orders over 95
Add To The Basket**
2 Gang Combination : 1 x 20amp Intermediate Switch + 1 x 20amp 2 Way Switch £110.64
3 Gang Combination : 1 x 20amp Intermediate Switch + 2 x 20amp 2 Way Switch £158.14
Add To The Basket


Notes


What is a Intermediate Toggle Switch and Toggle Switch Combination?

Toggle or Dolly Switches operate in the same way as a standard light switch. The difference is that the modern rocker is replaced by a more traditional toggle style switch. Many people prefer these as they are more representative of a period style switch or that they look more industrial or minimalist in contemporary environments.

Light Switches are generally available to switch 1 way and/or 2 way circuits. All of our Light Switches are 2 way versions and the beauty of this is that they can be used on both 1 way and 2 way circuits thus eliminating the need to buy both types. A 2 way circuit refers to a lighting point that can be switched from 2 different places i.e. Hall and Landing, where you might have a switch at the bottom of the stairs and a further switch at the top of the stairs that both control the same lighting point.

If you should have more than 2 switching positions you will require one of the switches to be an intermediate switch.

Intermediate Switches (also known as 3 way Switches) are typically used on a circuit that requires you to switch a lighting point from more than 2 positions ie On the Stairs and landings in a 3 story house where you would have a switch on the ground floor then also switches on the 2 upper floors that all control the same lighting point.

You would then require 2 x 2 way switches and 1 x intermediate switch to control this circuit.

Intermediate switches are generally only available as a single switch (One Gang) however we also sell multiple combinations of Intermediates and 2 way switches available from a double combination (Two Gang) or a 3 Way combination (Three Gang). The word “gang” refers to the rocker switch – for example if you require a triple light switch it would be 3 Gang.

Our light switches have a load rating of either 10amp or 20amp and the terminals will accept up to 3 x 1.5mm Twin & Earth Cables.

We recommend 16mm deep wall boxes for mounting our switches or 25mm deep wall boxes for shallow or flat plate Switches.

If you require other combinations not listed or any advice or assistance please call our sales team on 01926 289289.


Wiring Diagram

See the wiring diagrams for Intermediate Switches.

© 2019 Copyright Super Sockets
Super Sockets, Unit 4 Althorpe Enterprise Hub, Althorpe Street, Leamington Spa, Warwickshire, CV31 2GB  |  sales@supersockets.co.uk