Timeless Classic Brushed Copper PIR Switch






Prices

 *Free delivery on orders over £95
5 Metre PIR Switch : White Trim
£78.75 
£94.50
10 Metre PIR Switch : White Trim
£81.69 
£98.03


What is a PIR Switch?

Our PIR (Passive Infra Red) Sensor Switches are available in most finishes to complement the vast array of finishes and plate styles on offer at socketsandswitches.com. We offer two versions that cover a 5 metre detection range or a 10 metre detection range.

PIR (Passive Infra Red) Sensor Switches are designed for use in common areas where you might have regular visitors coming and going and the sensor allows for the lights or fans to switch on automatically then switch off again after a given period meaning that lights will never be left on when not required. These are most commonly used to switch lights on in an entrance hall or stairwell and the beauty of this is that they will switch themselves off after a pre-set time.

Previously PIR (Passive Infra Red) Sensor Switches have only been available in a plain white finish with an unsightly large plastic plate and they were found to be unsuitable for many properties where something more stylish was a requirement.

They incorporate a PIR quad sensor to detect movement of a warm body within their detection zone and a photocell to monitor the ambient light level. On detecting movement the PIR will switch the load on then if no more movement is detected within a certain pre-set time, then the PIR will switch off the load.

They have an adjustable time delay setting from 10 seconds up to 40 minutes that you pre-set on installation – the time delay can be reset or changed at any time by readjusting the concealed setting dials.

You can use these as a stand alone switch or link as many PIR (Passive Infra Red) Sensor Switches together as you like. You cannot use standard on/off switches on the same circuit and all other switch positions will also need to be PIR (Passive Infra Red) Sensor Switches or a Double Pole Switch as these PIR (Passive Infra Red) Sensor Switches require a Neutral.

Never use a PIR (Passive Infra Red) Sensor Switch that is not rated higher than the total load applied to it – the maximum loads are 1500w (240v) or 1500w (12v) or 500w (Fluorescent) or 500w (LED).

They will also switch on/off Fans to the maximum load of 250w.

We recommend a 35mm deep wall boxes for mounting our PIR (Passive Infra Red) Sensor Switches.



Customer reviews for Timeless Classic Brushed Copper PIR Switch


No reviews for the Timeless Classic Brushed Copper PIR Switch yet - Be the first to review it.

Other reviews for the Timeless Classic Switches & Sockets range are

Average customer rating: Product Rating 5 out of 54.8 stars - 5  reviews


Product Rating 4 out of 5      Great
24 March 2021 by , Warrington - Verified Customer

Only downside is the writing on the front which spoils the look.


Product Rating 5 out of 5      Good Product
16 March 2021 by , Haverhill - Verified Customer

Very happy!


Product Rating 5 out of 5      Finished!
13 March 2021 by , Leeds - Verified Customer

Now finished kitchen in copper sockets


Product Rating 5 out of 5      Very Good
16 February 2021 by , Croyden - Verified Customer

Like the darker finish. Teenagers not moaning about chargers a bonus.


Product Rating 5 out of 5      Great
07 February 2021 by , Oxford - Verified Customer

Great idea.




Your Review for the Timeless Classic Brushed Copper PIR Switch

Please enter your review for the Timeless Classic Brushed Copper PIR Switch here

 Rating:

Please rate the product - from 5 "I really like it" to 1 "Meh".
 

Review Title:

Your review

 

Name:

Email:

Location:


(Please enter village, town, area or city only - no postcodes please - for privacy)
Thank you.   




© 2024 Copyright Super Sockets
Super Sockets, Unit A5, Quarry Park, Old Milverton Lane, Blackdown, Leamington Spa, Warwickshire, CV32 6RW  |  [email protected]