Slim Polished Brass LED Dimmer


Slim Polished Brass LED Dimmer


  Please click on an image to enlarge.

Slim Polished Brass LED Dimmer - Click to see large image
Slim Polished Brass LED Dimmer - Click to see large image
Slim Polished Brass LED Dimmer - Click to see large image


Prices

 *Free delivery on orders over £95
1 Gang 100W 2 Way LED (Trailing Edge) Dimmer (Min Load 1W, Max Load 100W)
£49.02 
£34.31
£58.82
£41.17
2 Gang 100W 2 Way LED (Trailing Edge) Dimmer (Min Load 1W, Max Load 100W)
£87.28 
£61.09
£104.73
£73.31
3 Gang 100W 2 Way LED (Trailing Edge) Dimmer (Min Load 1W, Max Load 100W)
£134.81 
£94.37
£161.77
£113.24
4 Gang 100W 2 Way LED (Trailing Edge) Dimmer (Min Load 1W, Max Load 100W)
£176.87 
£123.80
£212.24
£148.56


What is a LED Dimmer?

Our LED Dimmers are specifically designed to operate on ALL types of DIMMABLE LED lamps and strips. These LED dimmers can be easily programmed to optimise LED performance by following the instructions provided with this product. The dimmers have a choice of modes to match your LEDs and the minimum brightness can changed to suit your room.

Important - non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur.

Mains voltage dimmable LED light bulbs can be dimmed using an ordinary resistive dimmer. LED lamps are an attractive proposition as they consume very low wattages and are very energy efficient. This can cause problems when choosing the correct dimmer.

If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 5 – 50w would be required.

Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.

Dimming low voltage LED lamps is also easily achieved by either dimming the driver on the primary (mains) side or on the secondary (low voltage) side. Of the two, primary side dimming is the more desirable and the easiest to achieve. The LED driver would need to be of a constant current type and dimmable.

Never mix lighting types through the same dimmer on the same circuit. For example if you have 3 halogen bulbs and 3 LED bulbs fitted in the same room on the same switch you cannot replace that switch with a dimmer unless you remove either the halogen lamps or the LEDs. If you were to fit a dimmer in these circumstances then damage to the dimmer, lamps or both will occur.

On special request we can make up combined dimmers that incorporate LED dimmers and Intelligent dimmers on the same plate if required.

We recommend 25mm deep wall boxes for mounting our LED dimmer switches or 35mm deep wall boxes for shallow or flat plate ranges.



Customer reviews for Slim Polished Brass LED Dimmer


No reviews for the Slim Polished Brass LED Dimmer yet - Be the first to review it.

Other reviews for the Slim Switches & Sockets range are

Average customer rating: Product Rating 7 out of 55 stars - 7  reviews


Product Rating 5 out of 5      Replaced An Old Plastic Socket That Cracked
05 April 2021 by , Leeds - Verified Customer


Product Rating 5 out of 5      Good Idea
03 April 2021 by , Kingston - Verified Customer

Added Cat6 between downstairs and upstairs for better connection. Works fine.


Product Rating 5 out of 5      Good Looking
31 March 2021 by , Brighton - Verified Customer

Looks the part and much more expensive than the price paid. Like how the switches work.


Product Rating 5 out of 5      Prefer Flat To Wall Bump
29 March 2021 by , Somerset - Verified Customer

I prefer flat switches and was very happy to find this as colour suits room while still flat.


Product Rating 5 out of 5      Tidies Things Up
16 March 2021 by , Watford - Verified Customer

Had the sky cable coming out of the wall and plaster was getting damaged. Used this plate to put the cable through and tidy up the wall.


Product Rating 5 out of 5      Beautiful
12 March 2021 by , London - Verified Customer

Beautiful and elegant really worth the price


Product Rating 5 out of 5      Ideal
11 February 2021 by , Suffolk - Verified Customer

Bought just this for water heater and fits in nicely




Your Review for the Slim Polished Brass LED Dimmer

Please enter your review for the Slim Polished Brass LED Dimmer here

 Rating:

Please rate the product - from 5 "I really like it" to 1 "Meh".
 

Review Title:

Your review

 

Name:

Email:

Location:


(Please enter village, town, area or city only - no postcodes please - for privacy)
Thank you.   




© 2024 Copyright Super Sockets
Super Sockets, Unit A5, Quarry Park, Old Milverton Lane, Blackdown, Leamington Spa, Warwickshire, CV32 6RW  |  [email protected]